Titles: NCDP ============= Contact: Wan, Oxford. Revision History:- ================ 5.00 H.S. Wan First version. N. Oblath Reorganization, use this bank for current pulse transformations. Titles Files ------------ ncd_input.dat Verification ------------ Description ----------- This bank contains the quantities for electronics simulation. (NCDP = NCD Properties bank) Data Words ---------- Line Type Variable [symbolic command] Description ---- ---- -------- -------------------------------- 1 I Custom electronics parameters flag 2..15 I Spare 16 F sqrt(LC) of NCD line (ns/cm, inverse of propagation velocity) 17 F * RC time constant of line for reflection simulation (ns) 18 F * Pre-amplifier gain (V/A) 19 F * Pre-amplifier low pass RC (ns) 20 F * Pre-amplifier high pass RC (ns) 21 F * MUX1 RC (ns) 22 F * MUX2 RC (ns) 23 F * Logamp constant a 24 F * Logamp constant b 25 F * Logamp constant c 26 F * Logamp time delay 27 F * Pretrigger offset 28 F Shaper threshold 29 F Shaper gain 30 F Mux threshold 31 F * Delays due to delay line (ns) 32 F Length of delay line (cm). 33 F Cable RC (ns) 34 F Counter RC (ns/cm) Notes ----- * Quantities marked with an asterisk are nominally read from the NCLA and NCLB banks. If desired, they can be read from this bank instead by using the "$custom_ncd_electronics $on" command in your command file, and setting the desired parameters to something other than -9999. If the values are still -9999., they will be read from the NCLA/B bank.